Insulation

Garage conversions frequently need additional insulation as the garage space will be converted into a habitable room, and therefore has to adhere to building regulations for insulation in this type of room. These regulations specify a U-value for insulation, which gauges the rate of heat loss. These are set differently for walls, floors, and roofs. To adhere to building regulations the garage conversion must meet the U-values in all of these areas, but extra insulation can be installed to surpass these values and increase energy efficiency. Wall insulation for garage conversions is normally accomplished by making use of internal wall insulation, which adds insulated plasterboard to the pre-existing walls. This will add thermal insulation and prevent heat from dissipating through the walls. Insulation must be added around doors and windows as these areas can leak heat especially severely. Roofs for garage conversions will also require insulation. Pitched roofs will require insulation to the same standard as the rest of the property. Flat roofs additionally require insulation. This can be performed by using a cold roof system, where insulation is fixed between the roof joists along with ventilation to prevent condensation forming. The other option is a warm roof, where insulation is added above the roof joists. Floor insulation is also needed in garage conversions. This is easier if the floor level of the garage requires lifting in order to meet the rest of the home as an additional layer of insulation can be easily put into either a raised concrete floor, timber joists or a floating floor. If the floor does not need to be lifted it may be necessary to dig out the floor to add the necessary insulation.