Insulation

Garage conversions often need supplementary insulation as the garage space will be altered to a habitable room, and therefore has to comply with building regulations for insulation in this type of space. These regulations specify a U-value for insulation, which gauges the rate of heat loss. These are set differently for walls, flooring, and roofs. To adhere to building regulations the garage conversion must meet the U-values in all three of these areas, but extra insulation can be added to exceed these values and improve energy efficiency. Wall insulation for garage conversions is normally done by employing internal wall insulation, which adds insulated plasterboard to the pre-existing walls. This will add thermal insulation and prevent heat from dissipating through the walls. Insulation must be installed around doors and windows as these areas can leak heat especially badly. Roofs for garage conversions will additionally require insulation. Pitched roofs will require insulation to the same standard as the rest of your house. Flat roofs additionally require insulation. This can be done by using a cold roof system, where insulation is fixed between the roof joists along with ventilation to avoid condensation forming. The other option is a warm roof, where insulation is installed above the roof joists. Floor insulation is also required in garage conversions. This is easier if the floor level of the garage requires elevating in order to meet the rest of the home as an additional layer of insulation can be easily put into either a lifted concrete floor, timber joists or a floating floor. If flooring does not need to be lifted it may be necessary to dig out the floor to add the necessary insulation.