Insulation

Garage conversions will most likely need extra insulation as the garage space will be altered to a habitable room, and therefore has to adhere to building regulations for insulation in this kind of space. These regulations designate a U-value for insulation, which measures the rate of heat loss. These are set differently for walls, flooring, and roofs. To adhere to building regulations the garage conversion must meet the U-values in all of these areas, but supplementary insulation can be installed to exceed these values and increase energy efficiency. Wall insulation for garage conversions is normally done by using internal wall insulation, which adds insulated plasterboard to the existing walls. This will add thermal insulation and prevent heat from dissipating through the walls. Insulation must be added around doors and windows as these areas can leak heat particularly severely. Roofs for garage conversions will additionally require insulation. Pitched roofs will demand insulation to the same standard as the rest of the property. Flat roofs additionally require insulation. This can be performed by using a cold roof system, where insulation is fixed between the roof joists along with ventilation to prevent condensation forming. The other possibility is a warm roof, where insulation is installed above the roof joists. Floor insulation is also required in garage conversions. This is easier if the floor level of the garage requires lifting in order to meet the rest of the home as an additional layer of insulation can be easily added to either a lifted concrete floor, timber joists or a floating floor. If the floor does not need to be raised it might be necessary to dig out the floor to add the required insulation.