Insulation

Garage conversions will most likely necessitate extra insulation as the garage space will be altered to a habitable room, and consequently must comply with building regulations for insulation in this type of room. These regulations set a U-value for insulation, which measures the rate of heat loss. These are set differently for walls, floors, and roofs. To comply with building regulations the garage conversion must meet the U-values in all of the areas, but supplementary insulation can be installed to exceed these values and increase energy efficiency. Wall insulation for garage conversions is normally performed by making use of internal wall insulation, which adds insulated plasterboard to the pre-existing walls. This will add thermal insulation and stop heat from dissipating through the walls. Insulation must be installed around windows and doors as these areas can leak heat particularly badly. Roofs for garage conversions will also require insulation. Pitched roofs will require insulation to the same level as the rest of your home. Flat roofs also require insulation. This can be done using a cold roof system, where insulation is fixed between the roof joists along with ventilation to prevent condensation forming. The other possibility is a warm roof, where insulation is installed above the roof joists. Floor insulation is also needed in garage conversions. This is less difficult if the floor level of the garage requires elevating in order to meet the rest of the house as another layer of insulation can be easily added to either a elevated concrete floor, timber joists or a floating floor. If flooring doesn’t need to be elevated it might be necessary to dig out the floor to add the required insulation.