Insulation

Garage conversions will most likely need extra insulation as the garage space will be altered to a habitable room, and therefore must comply with building regulations for insulation in this type of space. These regulations specify a U-value for insulation, which assesses the rate of heat loss. These are set differently for walls, floors, and roofing. To meet building regulations the garage conversion must meet the U-values in all of the areas, but additional insulation can be added to exceed these values and increase energy efficiency. Wall insulation for garage conversions is typically done by making use of internal wall insulation, which adds insulated plasterboard to the existing walls. This will add thermal insulation and prevent heat from dissipating through the walls. Insulation must also be installed around doors and windows as these areas can leak heat especially poorly. Roofs for garage conversions will also require insulation. Pitched roofs need insulation to the same standard as the rest of your house. Flat roofs also require insulation. This is performed utilizing a cold roof system, where insulation is fixed between the roof joists along with ventilation to prevent condensation forming. The other option is a warm roof, where insulation is installed above the roof joists. Floor insulation is also essential in garage conversions. This is less difficult if the floor level of the garage requires elevating in order to meet the rest of the house as an additional layer of insulation can be easily put into either a elevated concrete floor, timber joists or a floating floor. If the floor doesn’t need to be lifted it may be necessary to dig out the floor to add the necessary insulation.