Insulation

Garage conversions frequently necessitate supplementary insulation as the garage space will be converted into a habitable room, and therefore has to adhere to building regulations for insulation in this type of room. These regulations specify a U-value for insulation, which measures the rate of heat loss. These are set differently for walls, flooring, and roofs. To adhere to building regulations the garage conversion must meet the U-values in all three of the areas, but additional insulation can be installed to surpass these values and improve energy efficiency. Wall insulation for garage conversions is normally done by making use of internal wall insulation, which adds insulated plasterboard to the pre-existing walls. This will add thermal insulation and stop heat from dissipating through the walls. Insulation must be installed around windows and doors as these areas can leak heat particularly badly. Roofs for garage conversions will also require insulation. Pitched roofs need insulation to the same standard as the rest of your house. Flat roofs also require insulation. This can be done using a cold roof system, where insulation is fixed between the roof joists along with ventilation to prevent condensation forming. The other option is a warm roof, where insulation is installed above the roof joists. Floor insulation is also needed in garage conversions. This is easier if the floor level of the garage requires raising in order to meet the rest of the home as an additional layer of insulation can be easily put into either a lifted concrete floor, timber joists or a floating floor. If the floor doesn’t need to be elevated it could be necessary to dig out the floor to add the necessary insulation.