Insulation

Garage conversions will often necessitate additional insulation as the garage space will be altered to a habitable room, and consequently must adhere to building regulations for insulation in this kind of room. These regulations designate a U-value for insulation, which measures the rate of heat loss. These are set differently for walls, flooring, and roofing. To meet building regulations the garage conversion must meet the U-values in all three of the areas, but extra insulation can be added to exceed these values and increase energy efficiency. Wall insulation for garage conversions is normally accomplished by using internal wall insulation, which adds insulated plasterboard to the pre-existing walls. This will add thermal insulation and prevent heat from dissipating through the walls. Insulation must also be added around windows and doors as these areas can leak heat particularly badly. Roofs for garage conversions will also require insulation. Pitched roofs need insulation to the same level as the rest of the property. Flat roofs additionally require insulation. This can be performed using a cold roof system, where insulation is fixed between the roof joists along with ventilation to avoid condensation forming. The other possibility is a warm roof, where insulation is installed above the roof joists. Floor insulation is also needed in garage conversions. This is less difficult if the floor level of the garage requires elevating in order to meet the rest of the house as an extra layer of insulation can be easily added to either a lifted concrete floor, timber joists or a floating floor. If flooring does not need to be lifted it might be necessary to dig out the floor to add the required insulation.