Insulation

Garage conversions typically need supplementary insulation as the garage space will be converted into a habitable room, and consequently must comply with building regulations for insulation in this type of space. These regulations set a U-value for insulation, which measures the rate of heat loss. These are set differently for walls, flooring, and roofing. To adhere to building regulations the garage conversion must meet the U-values in all of the areas, but supplementary insulation can be installed to surpass these values and improve energy efficiency. Wall insulation for garage conversions is typically done by using internal wall insulation, which adds insulated plasterboard to the pre-existing walls. This will add thermal insulation and prevent heat from dissipating through the walls. Insulation must be added around doors and windows as these areas can leak heat particularly badly. Roofs for garage conversions will also require insulation. Pitched roofs need insulation to the same level as the rest of your house. Flat roofs also require insulation. This is achieved using a cold roof system, where insulation is fixed between the roof joists along with ventilation to prevent condensation forming. The other possibility is a warm roof, where insulation is installed above the roof joists. Floor insulation is also required in garage conversions. This is less difficult if the floor level of the garage requires raising in order to meet the rest of the house as an additional layer of insulation can be easily put into either a elevated concrete floor, timber joists or a floating floor. If flooring doesn’t need to be raised it may be necessary to dig out the floor to add the required insulation.