Insulation

Garage conversions often need additional insulation as the garage space will be altered to a habitable room, and consequently must comply with building regulations for insulation in this kind of room. These regulations designate a U-value for insulation, which gauges the rate of heat loss. These are set differently for walls, flooring, and roofing. To adhere to building regulations the garage conversion must meet the U-values in all of these areas, but extra insulation can be added to exceed these values and increase energy efficiency. Wall insulation for garage conversions is normally done by making use of internal wall insulation, which adds insulated plasterboard to the existing walls. This will add thermal insulation and prevent heat from dissipating through the walls. Insulation must also be installed around windows and doors as these areas can leak heat particularly poorly. Roofs for garage conversions will also require insulation. Pitched roofs need insulation to the same standard as the rest of your house. Flat roofs additionally require insulation. This is achieved using a cold roof system, where insulation is fixed between the roof joists along with ventilation to avoid condensation forming. The other possibility is a warm roof, where insulation is added above the roof joists. Floor insulation is also needed in garage conversions. This is less difficult if the floor level of the garage requires lifting in order to meet the rest of the home as another layer of insulation can be easily put into either a lifted concrete floor, timber joists or a floating floor. If the floor does not need to be raised it might be necessary to dig out the floor to add the necessary insulation.