Insulation

Garage conversions usually require extra insulation as the garage space will be converted into a habitable room, and consequently has to adhere to building regulations for insulation in this type of room. These regulations set a U-value for insulation, which measures the rate of heat loss. These are set differently for walls, floors, and roofs. To meet building regulations the garage conversion must meet the U-values in all three of the areas, but supplementary insulation can be added to exceed these values and increase energy efficiency. Wall insulation for garage conversions is typically accomplished by making use of internal wall insulation, which adds insulated plasterboard to the existing walls. This will add thermal insulation and stop heat from dissipating through the walls. Insulation must also be installed around doors and windows as these areas can leak heat particularly badly. Roofs for garage conversions will also require insulation. Pitched roofs will require insulation to the same standard as the rest of the property. Flat roofs additionally require insulation. This can be done by using a cold roof system, where insulation is fixed between the roof joists along with ventilation to avoid condensation forming. The other option is a warm roof, where insulation is installed above the roof joists. Floor insulation is also required in garage conversions. This is easier if the floor level of the garage requires elevating in order to meet the rest of the home as another layer of insulation can be easily put into either a elevated concrete floor, timber joists or a floating floor. If flooring doesn’t need to be raised it might be necessary to dig out the floor to add the necessary insulation.