Insulation

Garage conversions will most likely require extra insulation as the garage space will be changed into a habitable room, and therefore has to comply with building regulations for insulation in this kind of room. These regulations specify a U-value for insulation, which gauges the rate of heat loss. These are set differently for walls, flooring, and roofing. To meet building regulations the garage conversion must meet the U-values in all three of the areas, but additional insulation can be installed to surpass these values and increase energy efficiency. Wall insulation for garage conversions is typically done by making use of internal wall insulation, which adds insulated plasterboard to the pre-existing walls. This will add thermal insulation and prevent heat from dissipating through the walls. Insulation must be added around windows and doors as these areas can leak heat particularly badly. Roofs for garage conversions will additionally require insulation. Pitched roofs need insulation to the same level as the rest of your home. Flat roofs additionally require insulation. This is achieved by using a cold roof system, where insulation is fixed between the roof joists along with ventilation to prevent condensation forming. The other option is a warm roof, where insulation is added above the roof joists. Floor insulation is also essential in garage conversions. This is easier if the floor level of the garage requires lifting in order to meet the rest of the home as an additional layer of insulation can be easily put into either a raised concrete floor, timber joists or a floating floor. If flooring does not need to be raised it may be necessary to dig out the floor to add the required insulation.