Insulation

Garage conversions frequently require supplementary insulation as the garage space will be altered to a habitable room, and therefore must adhere to building regulations for insulation in this type of space. These regulations designate a U-value for insulation, which assesses the rate of heat loss. These are set differently for walls, flooring, and roofs. To comply with building regulations the garage conversion must meet the U-values in all three of the areas, but additional insulation can be installed to surpass these values and increase energy efficiency. Wall insulation for garage conversions is typically performed by using internal wall insulation, which adds insulated plasterboard to the existing walls. This will add thermal insulation and stop heat from dissipating through the walls. Insulation must also be added around windows and doors as these areas can leak heat particularly poorly. Roofs for garage conversions will additionally require insulation. Pitched roofs will require insulation to the same level as the rest of the property. Flat roofs also require insulation. This is done using a cold roof system, where insulation is fixed between the roof joists along with ventilation to avoid condensation forming. The other possibility is a warm roof, where insulation is installed above the roof joists. Floor insulation is also essential in garage conversions. This is easier if the floor level of the garage requires raising in order to meet the rest of the house as an extra layer of insulation can be easily put into either a raised concrete floor, timber joists or a floating floor. If the floor doesn’t need to be raised it could be necessary to dig out the floor to add the required insulation.