Insulation

Garage conversions typically necessitate additional insulation as the garage space will be changed into a habitable room, and consequently has to adhere to building regulations for insulation in this type of space. These regulations designate a U-value for insulation, which assesses the rate of heat loss. These are set differently for walls, flooring, and roofs. To comply with building regulations the garage conversion must meet the U-values in all of these areas, but additional insulation can be installed to exceed these values and improve energy efficiency. Wall insulation for garage conversions is typically accomplished by making use of internal wall insulation, which adds insulated plasterboard to the pre-existing walls. This will add thermal insulation and stop heat from dissipating through the walls. Insulation must also be added around doors and windows as these areas can leak heat especially badly. Roofs for garage conversions will additionally require insulation. Pitched roofs will require insulation to the same level as the rest of the property. Flat roofs also require insulation. This can be achieved by using a cold roof system, where insulation is fixed between the roof joists along with ventilation to avoid condensation forming. The other possibility is a warm roof, where insulation is installed above the roof joists. Floor insulation is also needed in garage conversions. This is less difficult if the floor level of the garage requires elevating in order to meet the rest of the house as an extra layer of insulation can be easily added to either a elevated concrete floor, timber joists or a floating floor. If flooring doesn’t need to be raised it might be necessary to dig out the floor to add the required insulation.