Insulation

Garage conversions frequently need additional insulation as the garage space will be changed into a habitable room, and consequently needs to comply with building regulations for insulation in this kind of space. These regulations set a U-value for insulation, which gauges the rate of heat loss. These are set differently for walls, flooring, and roofs. To meet building regulations the garage conversion must meet the U-values in all of these areas, but additional insulation can be installed to exceed these values and increase energy efficiency. Wall insulation for garage conversions is typically done by using internal wall insulation, which adds insulated plasterboard to the pre-existing walls. This will add thermal insulation and stop heat from dissipating through the walls. Insulation must be installed around doors and windows as these areas can leak heat particularly poorly. Roofs for garage conversions will additionally require insulation. Pitched roofs need insulation to the same standard as the rest of your home. Flat roofs also require insulation. This can be done utilizing a cold roof system, where insulation is fixed between the roof joists along with ventilation to prevent condensation forming. The other possibility is a warm roof, where insulation is added above the roof joists. Floor insulation is also required in garage conversions. This is easier if the floor level of the garage requires elevating in order to meet the rest of the home as an extra layer of insulation can be easily put into either a elevated concrete floor, timber joists or a floating floor. If flooring does not need to be elevated it could be necessary to dig out the floor to add the required insulation.