Insulation

Garage conversions typically require supplementary insulation as the garage space will be altered to a habitable room, and therefore has to adhere to building regulations for insulation in this type of space. These regulations designate a U-value for insulation, which assesses the rate of heat loss. These are set differently for walls, flooring, and roofs. To meet building regulations the garage conversion must meet the U-values in all three of these areas, but additional insulation can be added to surpass these values and increase energy efficiency. Wall insulation for garage conversions is typically done by employing internal wall insulation, which adds insulated plasterboard to the existing walls. This will add thermal insulation and stop heat from dissipating through the walls. Insulation must also be installed around doors and windows as these areas can leak heat particularly poorly. Roofs for garage conversions will additionally require insulation. Pitched roofs need insulation to the same level as the rest of your home. Flat roofs additionally require insulation. This can be done utilizing a cold roof system, where insulation is fixed between the roof joists along with ventilation to prevent condensation forming. The other option is a warm roof, where insulation is installed above the roof joists. Floor insulation is also required in garage conversions. This is easier if the floor level of the garage requires raising in order to meet the rest of the house as an additional layer of insulation can be easily added to either a elevated concrete floor, timber joists or a floating floor. If flooring does not need to be lifted it may be necessary to dig out the floor to add the required insulation.