Insulation

Garage conversions will often require extra insulation as the garage space will be converted into a habitable room, and therefore needs to adhere to building regulations for insulation in this kind of space. These regulations designate a U-value for insulation, which measures the rate of heat loss. These are set differently for walls, flooring, and roofs. To meet building regulations the garage conversion must meet the U-values in all three of these areas, but supplementary insulation can be added to exceed these values and increase energy efficiency. Wall insulation for garage conversions is normally accomplished by employing internal wall insulation, which adds insulated plasterboard to the pre-existing walls. This will add thermal insulation and prevent heat from dissipating through the walls. Insulation must also be added around windows and doors as these areas can leak heat particularly poorly. Roofs for garage conversions will additionally require insulation. Pitched roofs need insulation to the same level as the rest of your house. Flat roofs also require insulation. This can be done by using a cold roof system, where insulation is fixed between the roof joists along with ventilation to prevent condensation forming. The other option is a warm roof, where insulation is added above the roof joists. Floor insulation is also needed in garage conversions. This is less difficult if the floor level of the garage requires lifting in order to meet the rest of the home as an extra layer of insulation can be easily added to either a raised concrete floor, timber joists or a floating floor. If the floor doesn’t need to be elevated it might be necessary to dig out the floor to add the required insulation.