Insulation

Garage conversions typically require supplementary insulation as the garage space will be converted into a habitable room, and therefore must adhere to building regulations for insulation in this type of space. These regulations set a U-value for insulation, which assesses the rate of heat loss. These are set differently for walls, floors, and roofing. To meet building regulations the garage conversion must meet the U-values in all of these areas, but extra insulation can be added to exceed these values and increase energy efficiency. Wall insulation for garage conversions is typically accomplished by making use of internal wall insulation, which adds insulated plasterboard to the pre-existing walls. This will add thermal insulation and stop heat from dissipating through the walls. Insulation must also be installed around doors and windows as these areas can leak heat particularly poorly. Roofs for garage conversions will also require insulation. Pitched roofs will require insulation to the same level as the rest of your home. Flat roofs also require insulation. This can be performed by using a cold roof system, where insulation is fixed between the roof joists along with ventilation to prevent condensation forming. The other option is a warm roof, where insulation is installed above the roof joists. Floor insulation is also needed in garage conversions. This is easier if the floor level of the garage requires elevating in order to meet the rest of the house as an additional layer of insulation can be easily put into either a elevated concrete floor, timber joists or a floating floor. If flooring doesn’t need to be lifted it could be necessary to dig out the floor to add the required insulation.