Insulation

Garage conversions typically require supplementary insulation as the garage space will be altered to a habitable room, and therefore must adhere to building regulations for insulation in this type of room. These regulations specify a U-value for insulation, which assesses the rate of heat loss. These are set differently for walls, flooring, and roofing. To adhere to building regulations the garage conversion must meet the U-values in all three of these areas, but additional insulation can be added to surpass these values and increase energy efficiency. Wall insulation for garage conversions is typically performed by making use of internal wall insulation, which adds insulated plasterboard to the existing walls. This will add thermal insulation and stop heat from dissipating through the walls. Insulation must be added around doors and windows as these areas can leak heat especially severely. Roofs for garage conversions will additionally require insulation. Pitched roofs will demand insulation to the same level as the rest of your house. Flat roofs also require insulation. This can be performed by using a cold roof system, where insulation is fixed between the roof joists along with ventilation to avoid condensation forming. The other possibility is a warm roof, where insulation is added above the roof joists. Floor insulation is also essential in garage conversions. This is easier if the floor level of the garage requires lifting in order to meet the rest of the house as an extra layer of insulation can be easily added to either a elevated concrete floor, timber joists or a floating floor. If flooring doesn’t need to be raised it might be necessary to dig out the floor to add the required insulation.