Insulation

Garage conversions frequently necessitate supplementary insulation as the garage space will be altered to a habitable room, and consequently needs to comply with building regulations for insulation in this type of room. These regulations designate a U-value for insulation, which gauges the rate of heat loss. These are set differently for walls, floors, and roofing. To comply with building regulations the garage conversion must meet the U-values in all of the areas, but extra insulation can be installed to surpass these values and increase energy efficiency. Wall insulation for garage conversions is typically performed by making use of internal wall insulation, which adds insulated plasterboard to the pre-existing walls. This will add thermal insulation and stop heat from dissipating through the walls. Insulation must be added around windows and doors as these areas can leak heat especially severely. Roofs for garage conversions will also require insulation. Pitched roofs will require insulation to the same standard as the rest of your house. Flat roofs also require insulation. This can be done using a cold roof system, where insulation is fixed between the roof joists along with ventilation to prevent condensation forming. The other option is a warm roof, where insulation is installed above the roof joists. Floor insulation is also required in garage conversions. This is less difficult if the floor level of the garage requires lifting in order to meet the rest of the home as an additional layer of insulation can be easily added to either a lifted concrete floor, timber joists or a floating floor. If flooring doesn’t need to be elevated it might be necessary to dig out the floor to add the necessary insulation.