Insulation

Garage conversions frequently require extra insulation as the garage space will be converted into a habitable room, and therefore needs to adhere to building regulations for insulation in this type of space. These regulations designate a U-value for insulation, which gauges the rate of heat loss. These are set differently for walls, flooring, and roofs. To adhere to building regulations the garage conversion must meet the U-values in all three of the areas, but additional insulation can be added to exceed these values and improve energy efficiency. Wall insulation for garage conversions is typically accomplished by making use of internal wall insulation, which adds insulated plasterboard to the existing walls. This will add thermal insulation and stop heat from dissipating through the walls. Insulation must be installed around windows and doors as these areas can leak heat especially badly. Roofs for garage conversions will additionally require insulation. Pitched roofs need insulation to the same standard as the rest of the property. Flat roofs also require insulation. This can be performed by using a cold roof system, where insulation is fixed between the roof joists along with ventilation to prevent condensation forming. The other option is a warm roof, where insulation is added above the roof joists. Floor insulation is also essential in garage conversions. This is easier if the floor level of the garage requires raising in order to meet the rest of the home as an additional layer of insulation can be easily put into either a elevated concrete floor, timber joists or a floating floor. If the floor does not need to be elevated it may be necessary to dig out the floor to add the necessary insulation.