Insulation

Garage conversions will often need additional insulation as the garage space will be converted into a habitable room, and consequently needs to comply with building regulations for insulation in this type of room. These regulations set a U-value for insulation, which measures the rate of heat loss. These are set differently for walls, floors, and roofing. To adhere to building regulations the garage conversion must meet the U-values in all of these areas, but extra insulation can be installed to surpass these values and increase energy efficiency. Wall insulation for garage conversions is typically done by making use of internal wall insulation, which adds insulated plasterboard to the pre-existing walls. This will add thermal insulation and prevent heat from dissipating through the walls. Insulation must also be added around windows and doors as these areas can leak heat particularly poorly. Roofs for garage conversions will additionally require insulation. Pitched roofs will require insulation to the same standard as the rest of your house. Flat roofs additionally require insulation. This can be done utilizing a cold roof system, where insulation is fixed between the roof joists along with ventilation to prevent condensation forming. The other possibility is a warm roof, where insulation is added above the roof joists. Floor insulation is also required in garage conversions. This is less difficult if the floor level of the garage requires elevating in order to meet the rest of the house as an extra layer of insulation can be easily put into either a raised concrete floor, timber joists or a floating floor. If the floor does not need to be elevated it could be necessary to dig out the floor to add the required insulation.