Insulation

Garage conversions will most likely necessitate additional insulation as the garage space will be converted into a habitable room, and consequently has to adhere to building regulations for insulation in this type of room. These regulations set a U-value for insulation, which assesses the rate of heat loss. These are set differently for walls, floors, and roofing. To comply with building regulations the garage conversion must meet the U-values in all three of these areas, but supplementary insulation can be added to exceed these values and improve energy efficiency. Wall insulation for garage conversions is normally accomplished by using internal wall insulation, which adds insulated plasterboard to the pre-existing walls. This will add thermal insulation and stop heat from dissipating through the walls. Insulation must be installed around doors and windows as these areas can leak heat especially badly. Roofs for garage conversions will additionally require insulation. Pitched roofs need insulation to the same standard as the rest of your home. Flat roofs also require insulation. This is done by using a cold roof system, where insulation is fixed between the roof joists along with ventilation to avoid condensation forming. The other option is a warm roof, where insulation is installed above the roof joists. Floor insulation is also required in garage conversions. This is easier if the floor level of the garage requires lifting in order to meet the rest of the home as an additional layer of insulation can be easily added to either a lifted concrete floor, timber joists or a floating floor. If flooring does not need to be raised it might be necessary to dig out the floor to add the required insulation.