Insulation

Garage conversions will often necessitate additional insulation as the garage space will be changed into a habitable room, and consequently must comply with building regulations for insulation in this kind of room. These regulations set a U-value for insulation, which assesses the rate of heat loss. These are set differently for walls, flooring, and roofs. To meet building regulations the garage conversion must meet the U-values in all of these areas, but extra insulation can be added to surpass these values and increase energy efficiency. Wall insulation for garage conversions is normally accomplished by making use of internal wall insulation, which adds insulated plasterboard to the pre-existing walls. This will add thermal insulation and stop heat from dissipating through the walls. Insulation must be added around windows and doors as these areas can leak heat particularly severely. Roofs for garage conversions will also require insulation. Pitched roofs will require insulation to the same standard as the rest of the property. Flat roofs additionally require insulation. This is performed using a cold roof system, where insulation is fixed between the roof joists along with ventilation to prevent condensation forming. The other option is a warm roof, where insulation is added above the roof joists. Floor insulation is also needed in garage conversions. This is easier if the floor level of the garage requires raising in order to meet the rest of the home as an extra layer of insulation can be easily added to either a elevated concrete floor, timber joists or a floating floor. If the floor doesn’t need to be lifted it may be necessary to dig out the floor to add the required insulation.