Insulation

Garage conversions frequently require supplementary insulation as the garage space will be changed into a habitable room, and consequently needs to adhere to building regulations for insulation in this type of room. These regulations specify a U-value for insulation, which measures the rate of heat loss. These are set differently for walls, floors, and roofs. To meet building regulations the garage conversion must meet the U-values in all of these areas, but supplementary insulation can be installed to surpass these values and increase energy efficiency. Wall insulation for garage conversions is typically performed by using internal wall insulation, which adds insulated plasterboard to the existing walls. This will add thermal insulation and stop heat from dissipating through the walls. Insulation must be installed around doors and windows as these areas can leak heat especially severely. Roofs for garage conversions will additionally require insulation. Pitched roofs will demand insulation to the same standard as the rest of your house. Flat roofs also require insulation. This can be performed using a cold roof system, where insulation is fixed between the roof joists along with ventilation to avoid condensation forming. The other option is a warm roof, where insulation is added above the roof joists. Floor insulation is also required in garage conversions. This is easier if the floor level of the garage requires lifting in order to meet the rest of the home as an additional layer of insulation can be easily put into either a elevated concrete floor, timber joists or a floating floor. If flooring does not need to be elevated it may be necessary to dig out the floor to add the required insulation.