Insulation

Garage conversions frequently require extra insulation as the garage space will be changed into a habitable room, and consequently needs to adhere to building regulations for insulation in this kind of space. These regulations set a U-value for insulation, which measures the rate of heat loss. These are set differently for walls, floors, and roofing. To comply with building regulations the garage conversion must meet the U-values in all of these areas, but extra insulation can be added to surpass these values and increase energy efficiency. Wall insulation for garage conversions is normally done by employing internal wall insulation, which adds insulated plasterboard to the pre-existing walls. This will add thermal insulation and prevent heat from dissipating through the walls. Insulation must be added around windows and doors as these areas can leak heat especially poorly. Roofs for garage conversions will additionally require insulation. Pitched roofs will require insulation to the same standard as the rest of the property. Flat roofs also require insulation. This can be achieved utilizing a cold roof system, where insulation is fixed between the roof joists along with ventilation to prevent condensation forming. The other option is a warm roof, where insulation is added above the roof joists. Floor insulation is also needed in garage conversions. This is easier if the floor level of the garage requires lifting in order to meet the rest of the house as an additional layer of insulation can be easily added to either a elevated concrete floor, timber joists or a floating floor. If flooring doesn’t need to be elevated it may be necessary to dig out the floor to add the required insulation.