Insulation

Garage conversions typically require extra insulation as the garage space will be altered to a habitable room, and consequently has to comply with building regulations for insulation in this type of room. These regulations specify a U-value for insulation, which assesses the rate of heat loss. These are set differently for walls, floors, and roofing. To comply with building regulations the garage conversion must meet the U-values in all three of these areas, but supplementary insulation can be installed to exceed these values and improve energy efficiency. Wall insulation for garage conversions is normally accomplished by using internal wall insulation, which adds insulated plasterboard to the pre-existing walls. This will add thermal insulation and stop heat from dissipating through the walls. Insulation must be added around windows and doors as these areas can leak heat particularly severely. Roofs for garage conversions will also require insulation. Pitched roofs will demand insulation to the same standard as the rest of your home. Flat roofs also require insulation. This can be done by using a cold roof system, where insulation is fixed between the roof joists along with ventilation to prevent condensation forming. The other possibility is a warm roof, where insulation is added above the roof joists. Floor insulation is also essential in garage conversions. This is less difficult if the floor level of the garage requires lifting in order to meet the rest of the home as an additional layer of insulation can be easily put into either a lifted concrete floor, timber joists or a floating floor. If the floor doesn’t need to be lifted it could be necessary to dig out the floor to add the necessary insulation.