Insulation

Garage conversions often require additional insulation as the garage space will be converted into a habitable room, and therefore has to comply with building regulations for insulation in this kind of space. These regulations designate a U-value for insulation, which assesses the rate of heat loss. These are set differently for walls, flooring, and roofs. To meet building regulations the garage conversion must meet the U-values in all three of these areas, but additional insulation can be installed to surpass these values and improve energy efficiency. Wall insulation for garage conversions is normally accomplished by employing internal wall insulation, which adds insulated plasterboard to the existing walls. This will add thermal insulation and stop heat from dissipating through the walls. Insulation must be installed around windows and doors as these areas can leak heat particularly badly. Roofs for garage conversions will also require insulation. Pitched roofs need insulation to the same level as the rest of your house. Flat roofs also require insulation. This is achieved utilizing a cold roof system, where insulation is fixed between the roof joists along with ventilation to prevent condensation forming. The other possibility is a warm roof, where insulation is installed above the roof joists. Floor insulation is also essential in garage conversions. This is easier if the floor level of the garage requires lifting in order to meet the rest of the house as an extra layer of insulation can be easily put into either a elevated concrete floor, timber joists or a floating floor. If flooring does not need to be lifted it could be necessary to dig out the floor to add the necessary insulation.