Insulation

Garage conversions frequently require additional insulation as the garage space will be changed into a habitable room, and therefore has to comply with building regulations for insulation in this type of space. These regulations specify a U-value for insulation, which measures the rate of heat loss. These are set differently for walls, flooring, and roofing. To comply with building regulations the garage conversion must meet the U-values in all three of these areas, but additional insulation can be added to surpass these values and improve energy efficiency. Wall insulation for garage conversions is typically done by using internal wall insulation, which adds insulated plasterboard to the existing walls. This will add thermal insulation and stop heat from dissipating through the walls. Insulation must also be added around doors and windows as these areas can leak heat especially severely. Roofs for garage conversions will additionally require insulation. Pitched roofs will demand insulation to the same level as the rest of your house. Flat roofs also require insulation. This is achieved utilizing a cold roof system, where insulation is fixed between the roof joists along with ventilation to avoid condensation forming. The other option is a warm roof, where insulation is installed above the roof joists. Floor insulation is also essential in garage conversions. This is easier if the floor level of the garage requires lifting in order to meet the rest of the house as another layer of insulation can be easily put into either a elevated concrete floor, timber joists or a floating floor. If flooring doesn’t need to be lifted it could be necessary to dig out the floor to add the necessary insulation.