Insulation

Garage conversions will often necessitate additional insulation as the garage space will be converted into a habitable room, and consequently needs to adhere to building regulations for insulation in this kind of room. These regulations specify a U-value for insulation, which gauges the rate of heat loss. These are set differently for walls, flooring, and roofs. To adhere to building regulations the garage conversion must meet the U-values in all three of the areas, but supplementary insulation can be installed to exceed these values and improve energy efficiency. Wall insulation for garage conversions is typically accomplished by making use of internal wall insulation, which adds insulated plasterboard to the existing walls. This will add thermal insulation and stop heat from dissipating through the walls. Insulation must also be installed around doors and windows as these areas can leak heat especially badly. Roofs for garage conversions will additionally require insulation. Pitched roofs will demand insulation to the same standard as the rest of your house. Flat roofs additionally require insulation. This can be performed by using a cold roof system, where insulation is fixed between the roof joists along with ventilation to avoid condensation forming. The other possibility is a warm roof, where insulation is installed above the roof joists. Floor insulation is also needed in garage conversions. This is easier if the floor level of the garage requires raising in order to meet the rest of the home as an extra layer of insulation can be easily added to either a lifted concrete floor, timber joists or a floating floor. If flooring does not need to be lifted it could be necessary to dig out the floor to add the necessary insulation.