Insulation

Garage conversions will most likely require additional insulation as the garage space will be converted into a habitable room, and consequently needs to comply with building regulations for insulation in this kind of space. These regulations set a U-value for insulation, which assesses the rate of heat loss. These are set differently for walls, flooring, and roofs. To meet building regulations the garage conversion must meet the U-values in all three of the areas, but extra insulation can be installed to surpass these values and increase energy efficiency. Wall insulation for garage conversions is typically accomplished by using internal wall insulation, which adds insulated plasterboard to the existing walls. This will add thermal insulation and prevent heat from dissipating through the walls. Insulation must be installed around windows and doors as these areas can leak heat especially badly. Roofs for garage conversions will additionally require insulation. Pitched roofs will demand insulation to the same standard as the rest of your home. Flat roofs also require insulation. This can be done utilizing a cold roof system, where insulation is fixed between the roof joists along with ventilation to avoid condensation forming. The other option is a warm roof, where insulation is installed above the roof joists. Floor insulation is also required in garage conversions. This is easier if the floor level of the garage requires elevating in order to meet the rest of the home as another layer of insulation can be easily put into either a lifted concrete floor, timber joists or a floating floor. If the floor does not need to be elevated it might be necessary to dig out the floor to add the necessary insulation.