Insulation

Garage conversions often require supplementary insulation as the garage space will be altered to a habitable room, and consequently needs to comply with building regulations for insulation in this kind of space. These regulations set a U-value for insulation, which measures the rate of heat loss. These are set differently for walls, flooring, and roofing. To meet building regulations the garage conversion must meet the U-values in all three of the areas, but extra insulation can be added to surpass these values and improve energy efficiency. Wall insulation for garage conversions is typically accomplished by using internal wall insulation, which adds insulated plasterboard to the existing walls. This will add thermal insulation and prevent heat from dissipating through the walls. Insulation must be installed around windows and doors as these areas can leak heat especially poorly. Roofs for garage conversions will additionally require insulation. Pitched roofs need insulation to the same level as the rest of your house. Flat roofs also require insulation. This is done using a cold roof system, where insulation is fixed between the roof joists along with ventilation to prevent condensation forming. The other option is a warm roof, where insulation is added above the roof joists. Floor insulation is also essential in garage conversions. This is less difficult if the floor level of the garage requires elevating in order to meet the rest of the house as an additional layer of insulation can be easily added to either a elevated concrete floor, timber joists or a floating floor. If the floor does not need to be lifted it may be necessary to dig out the floor to add the required insulation.