Insulation

Garage conversions frequently necessitate supplementary insulation as the garage space will be changed into a habitable room, and consequently needs to comply with building regulations for insulation in this type of space. These regulations specify a U-value for insulation, which measures the rate of heat loss. These are set differently for walls, floors, and roofing. To adhere to building regulations the garage conversion must meet the U-values in all of these areas, but additional insulation can be installed to surpass these values and improve energy efficiency. Wall insulation for garage conversions is typically done by employing internal wall insulation, which adds insulated plasterboard to the pre-existing walls. This will add thermal insulation and stop heat from dissipating through the walls. Insulation must also be added around doors and windows as these areas can leak heat particularly badly. Roofs for garage conversions will also require insulation. Pitched roofs will require insulation to the same standard as the rest of your house. Flat roofs additionally require insulation. This is performed using a cold roof system, where insulation is fixed between the roof joists along with ventilation to avoid condensation forming. The other possibility is a warm roof, where insulation is installed above the roof joists. Floor insulation is also essential in garage conversions. This is less difficult if the floor level of the garage requires lifting in order to meet the rest of the home as an additional layer of insulation can be easily added to either a lifted concrete floor, timber joists or a floating floor. If flooring does not need to be elevated it might be necessary to dig out the floor to add the necessary insulation.