Insulation

Garage conversions will most likely need additional insulation as the garage space will be altered to a habitable room, and therefore has to comply with building regulations for insulation in this kind of space. These regulations set a U-value for insulation, which assesses the rate of heat loss. These are set differently for walls, floors, and roofing. To meet building regulations the garage conversion must meet the U-values in all three of the areas, but additional insulation can be added to exceed these values and improve energy efficiency. Wall insulation for garage conversions is typically performed by using internal wall insulation, which adds insulated plasterboard to the existing walls. This will add thermal insulation and prevent heat from dissipating through the walls. Insulation must also be added around windows and doors as these areas can leak heat particularly poorly. Roofs for garage conversions will also require insulation. Pitched roofs need insulation to the same standard as the rest of your home. Flat roofs also require insulation. This can be done by using a cold roof system, where insulation is fixed between the roof joists along with ventilation to prevent condensation forming. The other option is a warm roof, where insulation is added above the roof joists. Floor insulation is also required in garage conversions. This is less difficult if the floor level of the garage requires raising in order to meet the rest of the home as an additional layer of insulation can be easily put into either a lifted concrete floor, timber joists or a floating floor. If flooring does not need to be raised it may be necessary to dig out the floor to add the required insulation.