Insulation

Garage conversions typically necessitate extra insulation as the garage space will be converted into a habitable room, and therefore has to comply with building regulations for insulation in this kind of room. These regulations designate a U-value for insulation, which gauges the rate of heat loss. These are set differently for walls, flooring, and roofing. To comply with building regulations the garage conversion must meet the U-values in all three of these areas, but supplementary insulation can be added to exceed these values and improve energy efficiency. Wall insulation for garage conversions is normally done by making use of internal wall insulation, which adds insulated plasterboard to the existing walls. This will add thermal insulation and stop heat from dissipating through the walls. Insulation must be added around windows and doors as these areas can leak heat particularly poorly. Roofs for garage conversions will additionally require insulation. Pitched roofs will require insulation to the same level as the rest of your house. Flat roofs also require insulation. This can be done by using a cold roof system, where insulation is fixed between the roof joists along with ventilation to avoid condensation forming. The other possibility is a warm roof, where insulation is installed above the roof joists. Floor insulation is also needed in garage conversions. This is easier if the floor level of the garage requires lifting in order to meet the rest of the home as an additional layer of insulation can be easily put into either a raised concrete floor, timber joists or a floating floor. If the floor does not need to be lifted it may be necessary to dig out the floor to add the required insulation.