Insulation

Garage conversions typically necessitate extra insulation as the garage space will be changed into a habitable room, and consequently has to adhere to building regulations for insulation in this type of space. These regulations specify a U-value for insulation, which assesses the rate of heat loss. These are set differently for walls, flooring, and roofing. To comply with building regulations the garage conversion must meet the U-values in all three of these areas, but additional insulation can be added to exceed these values and increase energy efficiency. Wall insulation for garage conversions is typically done by using internal wall insulation, which adds insulated plasterboard to the existing walls. This will add thermal insulation and prevent heat from dissipating through the walls. Insulation must be installed around windows and doors as these areas can leak heat especially badly. Roofs for garage conversions will also require insulation. Pitched roofs will demand insulation to the same standard as the rest of your home. Flat roofs additionally require insulation. This can be performed by using a cold roof system, where insulation is fixed between the roof joists along with ventilation to avoid condensation forming. The other possibility is a warm roof, where insulation is installed above the roof joists. Floor insulation is also needed in garage conversions. This is easier if the floor level of the garage requires lifting in order to meet the rest of the house as an extra layer of insulation can be easily added to either a elevated concrete floor, timber joists or a floating floor. If flooring doesn’t need to be raised it may be necessary to dig out the floor to add the necessary insulation.