Insulation

Garage conversions will often need additional insulation as the garage space will be changed into a habitable room, and consequently must comply with building regulations for insulation in this type of room. These regulations specify a U-value for insulation, which assesses the rate of heat loss. These are set differently for walls, floors, and roofs. To comply with building regulations the garage conversion must meet the U-values in all three of these areas, but extra insulation can be installed to surpass these values and increase energy efficiency. Wall insulation for garage conversions is typically accomplished by using internal wall insulation, which adds insulated plasterboard to the pre-existing walls. This will add thermal insulation and stop heat from dissipating through the walls. Insulation must also be installed around windows and doors as these areas can leak heat especially severely. Roofs for garage conversions will additionally require insulation. Pitched roofs need insulation to the same standard as the rest of your home. Flat roofs additionally require insulation. This is performed by using a cold roof system, where insulation is fixed between the roof joists along with ventilation to avoid condensation forming. The other option is a warm roof, where insulation is added above the roof joists. Floor insulation is also essential in garage conversions. This is less difficult if the floor level of the garage requires raising in order to meet the rest of the home as another layer of insulation can be easily put into either a elevated concrete floor, timber joists or a floating floor. If flooring doesn’t need to be raised it could be necessary to dig out the floor to add the required insulation.