Insulation

Garage conversions will most likely necessitate supplementary insulation as the garage space will be changed into a habitable room, and therefore has to adhere to building regulations for insulation in this kind of room. These regulations set a U-value for insulation, which measures the rate of heat loss. These are set differently for walls, floors, and roofing. To adhere to building regulations the garage conversion must meet the U-values in all three of the areas, but supplementary insulation can be installed to surpass these values and improve energy efficiency. Wall insulation for garage conversions is typically performed by employing internal wall insulation, which adds insulated plasterboard to the existing walls. This will add thermal insulation and stop heat from dissipating through the walls. Insulation must be installed around windows and doors as these areas can leak heat particularly severely. Roofs for garage conversions will also require insulation. Pitched roofs will demand insulation to the same level as the rest of your home. Flat roofs also require insulation. This is achieved utilizing a cold roof system, where insulation is fixed between the roof joists along with ventilation to avoid condensation forming. The other option is a warm roof, where insulation is added above the roof joists. Floor insulation is also essential in garage conversions. This is easier if the floor level of the garage requires lifting in order to meet the rest of the house as an extra layer of insulation can be easily put into either a elevated concrete floor, timber joists or a floating floor. If the floor does not need to be elevated it may be necessary to dig out the floor to add the required insulation.