Insulation

Garage conversions often need extra insulation as the garage space will be altered to a habitable room, and therefore has to comply with building regulations for insulation in this kind of space. These regulations set a U-value for insulation, which gauges the rate of heat loss. These are set differently for walls, flooring, and roofs. To meet building regulations the garage conversion must meet the U-values in all of the areas, but supplementary insulation can be added to exceed these values and improve energy efficiency. Wall insulation for garage conversions is normally done by using internal wall insulation, which adds insulated plasterboard to the pre-existing walls. This will add thermal insulation and stop heat from dissipating through the walls. Insulation must be added around windows and doors as these areas can leak heat particularly poorly. Roofs for garage conversions will additionally require insulation. Pitched roofs will demand insulation to the same standard as the rest of your home. Flat roofs also require insulation. This is done using a cold roof system, where insulation is fixed between the roof joists along with ventilation to avoid condensation forming. The other possibility is a warm roof, where insulation is added above the roof joists. Floor insulation is also needed in garage conversions. This is easier if the floor level of the garage requires elevating in order to meet the rest of the house as an additional layer of insulation can be easily put into either a raised concrete floor, timber joists or a floating floor. If the floor doesn’t need to be elevated it could be necessary to dig out the floor to add the necessary insulation.