Insulation

Garage conversions frequently require supplementary insulation as the garage space will be changed into a habitable room, and therefore needs to adhere to building regulations for insulation in this kind of room. These regulations specify a U-value for insulation, which assesses the rate of heat loss. These are set differently for walls, floors, and roofing. To comply with building regulations the garage conversion must meet the U-values in all three of these areas, but supplementary insulation can be added to surpass these values and increase energy efficiency. Wall insulation for garage conversions is typically performed by making use of internal wall insulation, which adds insulated plasterboard to the existing walls. This will add thermal insulation and prevent heat from dissipating through the walls. Insulation must be installed around doors and windows as these areas can leak heat especially severely. Roofs for garage conversions will also require insulation. Pitched roofs need insulation to the same level as the rest of your home. Flat roofs also require insulation. This is achieved utilizing a cold roof system, where insulation is fixed between the roof joists along with ventilation to avoid condensation forming. The other possibility is a warm roof, where insulation is added above the roof joists. Floor insulation is also needed in garage conversions. This is easier if the floor level of the garage requires elevating in order to meet the rest of the home as another layer of insulation can be easily added to either a elevated concrete floor, timber joists or a floating floor. If the floor does not need to be lifted it may be necessary to dig out the floor to add the required insulation.