Insulation

Garage conversions often need extra insulation as the garage space will be converted into a habitable room, and therefore has to adhere to building regulations for insulation in this type of room. These regulations set a U-value for insulation, which assesses the rate of heat loss. These are set differently for walls, floors, and roofs. To meet building regulations the garage conversion must meet the U-values in all of the areas, but additional insulation can be installed to surpass these values and increase energy efficiency. Wall insulation for garage conversions is normally done by making use of internal wall insulation, which adds insulated plasterboard to the existing walls. This will add thermal insulation and stop heat from dissipating through the walls. Insulation must be installed around doors and windows as these areas can leak heat particularly badly. Roofs for garage conversions will also require insulation. Pitched roofs will require insulation to the same level as the rest of your house. Flat roofs also require insulation. This is done using a cold roof system, where insulation is fixed between the roof joists along with ventilation to prevent condensation forming. The other option is a warm roof, where insulation is added above the roof joists. Floor insulation is also needed in garage conversions. This is less difficult if the floor level of the garage requires elevating in order to meet the rest of the home as an additional layer of insulation can be easily added to either a raised concrete floor, timber joists or a floating floor. If the floor does not need to be raised it may be necessary to dig out the floor to add the necessary insulation.