Insulation

Garage conversions usually necessitate extra insulation as the garage space will be altered to a habitable room, and consequently has to adhere to building regulations for insulation in this kind of room. These regulations set a U-value for insulation, which measures the rate of heat loss. These are set differently for walls, flooring, and roofing. To adhere to building regulations the garage conversion must meet the U-values in all three of the areas, but extra insulation can be installed to exceed these values and increase energy efficiency. Wall insulation for garage conversions is normally done by making use of internal wall insulation, which adds insulated plasterboard to the pre-existing walls. This will add thermal insulation and stop heat from dissipating through the walls. Insulation must also be added around windows and doors as these areas can leak heat particularly badly. Roofs for garage conversions will also require insulation. Pitched roofs will require insulation to the same level as the rest of the property. Flat roofs also require insulation. This is achieved using a cold roof system, where insulation is fixed between the roof joists along with ventilation to avoid condensation forming. The other possibility is a warm roof, where insulation is installed above the roof joists. Floor insulation is also required in garage conversions. This is easier if the floor level of the garage requires lifting in order to meet the rest of the home as an extra layer of insulation can be easily put into either a lifted concrete floor, timber joists or a floating floor. If the floor doesn’t need to be lifted it could be necessary to dig out the floor to add the required insulation.