Insulation

Garage conversions typically necessitate additional insulation as the garage space will be converted into a habitable room, and consequently has to comply with building regulations for insulation in this type of space. These regulations specify a U-value for insulation, which assesses the rate of heat loss. These are set differently for walls, flooring, and roofing. To comply with building regulations the garage conversion must meet the U-values in all three of the areas, but additional insulation can be installed to surpass these values and improve energy efficiency. Wall insulation for garage conversions is normally performed by using internal wall insulation, which adds insulated plasterboard to the existing walls. This will add thermal insulation and stop heat from dissipating through the walls. Insulation must be installed around windows and doors as these areas can leak heat particularly poorly. Roofs for garage conversions will additionally require insulation. Pitched roofs will demand insulation to the same standard as the rest of your house. Flat roofs additionally require insulation. This is performed by using a cold roof system, where insulation is fixed between the roof joists along with ventilation to prevent condensation forming. The other option is a warm roof, where insulation is added above the roof joists. Floor insulation is also required in garage conversions. This is easier if the floor level of the garage requires lifting in order to meet the rest of the home as an extra layer of insulation can be easily put into either a elevated concrete floor, timber joists or a floating floor. If the floor does not need to be lifted it could be necessary to dig out the floor to add the necessary insulation.