Insulation

Garage conversions often need additional insulation as the garage space will be altered to a habitable room, and consequently must comply with building regulations for insulation in this type of room. These regulations designate a U-value for insulation, which measures the rate of heat loss. These are set differently for walls, floors, and roofs. To meet building regulations the garage conversion must meet the U-values in all of the areas, but extra insulation can be added to exceed these values and increase energy efficiency. Wall insulation for garage conversions is normally accomplished by employing internal wall insulation, which adds insulated plasterboard to the pre-existing walls. This will add thermal insulation and prevent heat from dissipating through the walls. Insulation must also be installed around doors and windows as these areas can leak heat particularly severely. Roofs for garage conversions will additionally require insulation. Pitched roofs need insulation to the same level as the rest of your house. Flat roofs additionally require insulation. This can be performed by using a cold roof system, where insulation is fixed between the roof joists along with ventilation to prevent condensation forming. The other option is a warm roof, where insulation is added above the roof joists. Floor insulation is also needed in garage conversions. This is easier if the floor level of the garage requires raising in order to meet the rest of the home as an additional layer of insulation can be easily put into either a elevated concrete floor, timber joists or a floating floor. If the floor does not need to be raised it could be necessary to dig out the floor to add the necessary insulation.