Insulation

Garage conversions will most likely necessitate supplementary insulation as the garage space will be converted into a habitable room, and therefore has to adhere to building regulations for insulation in this kind of space. These regulations designate a U-value for insulation, which assesses the rate of heat loss. These are set differently for walls, floors, and roofs. To comply with building regulations the garage conversion must meet the U-values in all three of the areas, but extra insulation can be installed to surpass these values and improve energy efficiency. Wall insulation for garage conversions is typically done by employing internal wall insulation, which adds insulated plasterboard to the pre-existing walls. This will add thermal insulation and prevent heat from dissipating through the walls. Insulation must be installed around doors and windows as these areas can leak heat particularly poorly. Roofs for garage conversions will also require insulation. Pitched roofs need insulation to the same standard as the rest of your house. Flat roofs also require insulation. This is done by using a cold roof system, where insulation is fixed between the roof joists along with ventilation to prevent condensation forming. The other option is a warm roof, where insulation is added above the roof joists. Floor insulation is also required in garage conversions. This is less difficult if the floor level of the garage requires raising in order to meet the rest of the home as an additional layer of insulation can be easily added to either a lifted concrete floor, timber joists or a floating floor. If the floor doesn’t need to be lifted it might be necessary to dig out the floor to add the necessary insulation.