Insulation

Garage conversions frequently necessitate supplementary insulation as the garage space will be altered to a habitable room, and consequently needs to adhere to building regulations for insulation in this kind of room. These regulations designate a U-value for insulation, which gauges the rate of heat loss. These are set differently for walls, flooring, and roofing. To comply with building regulations the garage conversion must meet the U-values in all three of these areas, but additional insulation can be installed to exceed these values and increase energy efficiency. Wall insulation for garage conversions is normally performed by using internal wall insulation, which adds insulated plasterboard to the existing walls. This will add thermal insulation and prevent heat from dissipating through the walls. Insulation must also be installed around doors and windows as these areas can leak heat particularly badly. Roofs for garage conversions will also require insulation. Pitched roofs need insulation to the same level as the rest of your house. Flat roofs also require insulation. This is performed using a cold roof system, where insulation is fixed between the roof joists along with ventilation to prevent condensation forming. The other option is a warm roof, where insulation is installed above the roof joists. Floor insulation is also required in garage conversions. This is less difficult if the floor level of the garage requires lifting in order to meet the rest of the house as an additional layer of insulation can be easily added to either a lifted concrete floor, timber joists or a floating floor. If the floor doesn’t need to be elevated it may be necessary to dig out the floor to add the necessary insulation.