Insulation

Garage conversions often need extra insulation as the garage space will be converted into a habitable room, and consequently has to comply with building regulations for insulation in this type of room. These regulations designate a U-value for insulation, which assesses the rate of heat loss. These are set differently for walls, floors, and roofs. To comply with building regulations the garage conversion must meet the U-values in all three of these areas, but supplementary insulation can be added to surpass these values and improve energy efficiency. Wall insulation for garage conversions is normally done by making use of internal wall insulation, which adds insulated plasterboard to the existing walls. This will add thermal insulation and stop heat from dissipating through the walls. Insulation must also be installed around doors and windows as these areas can leak heat especially badly. Roofs for garage conversions will additionally require insulation. Pitched roofs need insulation to the same level as the rest of your house. Flat roofs also require insulation. This can be done using a cold roof system, where insulation is fixed between the roof joists along with ventilation to prevent condensation forming. The other possibility is a warm roof, where insulation is added above the roof joists. Floor insulation is also needed in garage conversions. This is less difficult if the floor level of the garage requires raising in order to meet the rest of the house as an additional layer of insulation can be easily put into either a lifted concrete floor, timber joists or a floating floor. If flooring doesn’t need to be raised it could be necessary to dig out the floor to add the required insulation.