Insulation

Garage conversions frequently need additional insulation as the garage space will be converted into a habitable room, and therefore needs to comply with building regulations for insulation in this kind of space. These regulations set a U-value for insulation, which gauges the rate of heat loss. These are set differently for walls, floors, and roofs. To meet building regulations the garage conversion must meet the U-values in all three of these areas, but extra insulation can be installed to exceed these values and improve energy efficiency. Wall insulation for garage conversions is typically performed by using internal wall insulation, which adds insulated plasterboard to the existing walls. This will add thermal insulation and stop heat from dissipating through the walls. Insulation must be installed around doors and windows as these areas can leak heat particularly poorly. Roofs for garage conversions will also require insulation. Pitched roofs will demand insulation to the same standard as the rest of your house. Flat roofs also require insulation. This can be performed by using a cold roof system, where insulation is fixed between the roof joists along with ventilation to prevent condensation forming. The other option is a warm roof, where insulation is added above the roof joists. Floor insulation is also required in garage conversions. This is less difficult if the floor level of the garage requires elevating in order to meet the rest of the house as an additional layer of insulation can be easily put into either a elevated concrete floor, timber joists or a floating floor. If the floor does not need to be lifted it may be necessary to dig out the floor to add the required insulation.