Insulation

Garage conversions will most likely require extra insulation as the garage space will be changed into a habitable room, and consequently must comply with building regulations for insulation in this kind of space. These regulations designate a U-value for insulation, which gauges the rate of heat loss. These are set differently for walls, floors, and roofs. To meet building regulations the garage conversion must meet the U-values in all of these areas, but supplementary insulation can be added to exceed these values and improve energy efficiency. Wall insulation for garage conversions is typically performed by making use of internal wall insulation, which adds insulated plasterboard to the pre-existing walls. This will add thermal insulation and stop heat from dissipating through the walls. Insulation must be added around doors and windows as these areas can leak heat particularly poorly. Roofs for garage conversions will additionally require insulation. Pitched roofs will demand insulation to the same level as the rest of the property. Flat roofs also require insulation. This is performed by using a cold roof system, where insulation is fixed between the roof joists along with ventilation to prevent condensation forming. The other possibility is a warm roof, where insulation is added above the roof joists. Floor insulation is also required in garage conversions. This is less difficult if the floor level of the garage requires lifting in order to meet the rest of the home as an additional layer of insulation can be easily put into either a lifted concrete floor, timber joists or a floating floor. If the floor doesn’t need to be elevated it could be necessary to dig out the floor to add the required insulation.