Insulation

Garage conversions frequently necessitate additional insulation as the garage space will be changed into a habitable room, and consequently has to adhere to building regulations for insulation in this kind of room. These regulations designate a U-value for insulation, which gauges the rate of heat loss. These are set differently for walls, flooring, and roofs. To meet building regulations the garage conversion must meet the U-values in all of these areas, but additional insulation can be added to surpass these values and increase energy efficiency. Wall insulation for garage conversions is normally done by using internal wall insulation, which adds insulated plasterboard to the existing walls. This will add thermal insulation and prevent heat from dissipating through the walls. Insulation must also be installed around windows and doors as these areas can leak heat especially severely. Roofs for garage conversions will also require insulation. Pitched roofs will demand insulation to the same level as the rest of your house. Flat roofs additionally require insulation. This is done utilizing a cold roof system, where insulation is fixed between the roof joists along with ventilation to avoid condensation forming. The other possibility is a warm roof, where insulation is added above the roof joists. Floor insulation is also essential in garage conversions. This is easier if the floor level of the garage requires raising in order to meet the rest of the house as an extra layer of insulation can be easily added to either a elevated concrete floor, timber joists or a floating floor. If the floor does not need to be raised it may be necessary to dig out the floor to add the required insulation.