Insulation

Garage conversions typically necessitate extra insulation as the garage space will be changed into a habitable room, and consequently must comply with building regulations for insulation in this kind of room. These regulations specify a U-value for insulation, which gauges the rate of heat loss. These are set differently for walls, flooring, and roofs. To adhere to building regulations the garage conversion must meet the U-values in all of these areas, but supplementary insulation can be installed to surpass these values and improve energy efficiency. Wall insulation for garage conversions is normally accomplished by employing internal wall insulation, which adds insulated plasterboard to the pre-existing walls. This will add thermal insulation and stop heat from dissipating through the walls. Insulation must be added around doors and windows as these areas can leak heat especially severely. Roofs for garage conversions will also require insulation. Pitched roofs will demand insulation to the same standard as the rest of your home. Flat roofs additionally require insulation. This can be performed utilizing a cold roof system, where insulation is fixed between the roof joists along with ventilation to prevent condensation forming. The other possibility is a warm roof, where insulation is installed above the roof joists. Floor insulation is also required in garage conversions. This is less difficult if the floor level of the garage requires elevating in order to meet the rest of the house as another layer of insulation can be easily put into either a lifted concrete floor, timber joists or a floating floor. If the floor does not need to be lifted it may be necessary to dig out the floor to add the required insulation.